Login

Source: 

What Is an Infinite Reboot Loop?

Have you ever encountered an infinite reboot loop?

You would probably recall if you have. It is instantly recognisable by the failure of Windows to correctly load up after switching on your PC or laptop. Instead, the computer will reach a certain stage before the logon screen only to then reset back to the boot screen, at which point it will attempt to load Windows again, becoming caught in the loop (although in some cases it might successfully boot) again and again.

The error occurs because of a problem with the Windows 7 system registry. Unfortunately without booting into Windows the registry cannot be fixed, leaving the operating system unreachable.

 

 

It’s a Catch 22 situation.

In order to overcome this problem, the tools provided in the Windows 7 System Recovery Options can be used.

Booting Into the System Recovery Options Screen

First you will need to boot your computer into the System Recovery Options screen. This is usually done with the installation DVD, which should be inserted into the optical drive. When the computer boots, Press any key to boot from CD or DVD as requested, select your language preference and then click Repair your computer. A list of installed operating systems should be displayed – select Windows 7 and click Next.

muo w7bootloop3   How To Fix A Windows 7 Infinite Reboot Loop

 

 

The System Recovery Options screen will appear. Select the first option, Use recovery tools that can help fix problems with Windows, and then select Startup Repair.

(If your computer has a pre-installed recovery partition, the process is a little difference. In this case, boot to the Advanced Boot Options screen, select Repair your computer and tap Enter. Next, select the keyboard language type, then your username and password before selectingStartup Repair in the System Recovery Options screen.)

With Startup Repair selected, Windows will attempt to automate the repair; this might work – otherwise, further action will be required.

Preparing Windows 7 Recovery

If the Startup Repair option fails, you will receive a message reading Windows cannot repair this computer automatically. At the bottom of the message, click View advanced options for system recovery and support to return to System Recovery Options, and instead clickCommand Prompt.

The black command line interface will open with X:\ selected by default; this is the Windows internal RAM disk that is used by System Repair. You will need to navigate to your Windows system drive, which will by default be on the C: drive.

To open this, type C: and press Enter. Type DIR and press Enter to check that you are in the right drive – the contents listed should include the Program Files, Users and Windows folders.

muo w7bootloop4   How To Fix A Windows 7 Infinite Reboot Loop

 

 

You will then need to change directory. Enter CD \windows\system32\config and then DIR to check that the correct files and folders are listed:

  • RegBack
  • DEFAULT
  • SAM
  • SECURITY
  • SOFTWARE
  • SYSTEM

With access to the correct directory and the required folders present, enter MD mybackup to create a backup folder. Enter copy *.* mybackup to copy everything to this location, agreeing to the overwrite warnings when they appear.

muo w7bootloop7   How To Fix A Windows 7 Infinite Reboot Loop

 

 

The RegBack folder stores automatic Windows registry backups. To check if these can be used in restoring your system, enter CD RegBack and then DIR to view the contents. In the folder, you should have the following:

  • DEFAULT, SAM and SECURITY files, each around 262,000 bytes
  • SOFTWARE file, around 26,000,000 bytes
  • SYSTEM file, around 9,900,000 bytes

Note that these figures are approximate, but recognise that if any of these files display a size of zero bytes then you will have to resort to another method of restoring Windows 7.

Running the Windows 7 Recovery

With your RegBack folder containing the data you need to restore Windows 7 and rescue it from the reboot loop, you will be able to copy the contents and use them to get the operating system back up and running again.

muo w7bootloop8   How To Fix A Windows 7 Infinite Reboot Loop

 

 

Begin by entering copy *.* .. – note the two trailing dots. These indicate that the contents should be pasted to the level above – the Config folder. Agree to all prompts concerning whether you want to overwrite files, and once the process has completed enter exit to close the command prompt.

muo w7bootloop9   How To Fix A Windows 7 Infinite Reboot Loop

 

 

On the System Recovery Options screen, click Restart to reboot your PC – if everything has gone as it should, Windows 7 should now start correctly!

Conclusion

Reboot loops have long been a problem with Windows. While previous versions offered a couple of ways out in the recovery options, these solutions were far from comprehensive.

The same is true in Windows 7 but there is at least a much better success rate of dealing with infinite reboot loops.

When following the steps outlined here, please take care to follow them precisely. Errors that you make while using the command line interface cannot be undone. Note also that these steps don’t guarantee success – you should be prepared to reinstall Windows in the event that fixing the reboot loop fails.

 

Go to top